Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Current »

System Preparation

Install CentOS 6

The first thing that is required is a CentOS machine - this can be physical or virtual.

  1. Install the operating system via usual mechanism (e.g., net boot CD, ISO in VMware/VirtualBox or the DVD image).
  2. Choose the following server install options: "Basic server”.
  3. Create/choose a secure root password and an initial system user account.
  4. Once installed, make sure you run a yum makecache and yum update to ensure your system is fully up to date.

Tip

We would recommend using LVM when disk partitioning to allow easier partition/disk expansion on a live system.

Warning

After install, you will want to secure/lockdown the server as best practice dictates - for both the server and any extra software installed. This is beyond the remit of this guide but there are many guides available that provide information on how to secure your CentOS servers and applications.

Configure CentOS 6

Next, there are a few CentOS configuration options that need to be set in advance.

SELinux configuration

There are a few SELinux policies missing for Moonshot. Hence, SELinux must either be run in Permissive mode, or the `radius` and `radiusd_moonshot` policies be disabled whenever FreeRadius is used (ie. APC, IDPs and RPPs)

For disabling the `radius` and `radiusd_moonshot` policies and let FreeRadius run unconfined, use the following steps:

$ semodule -d radiusd_moonshot
$ semodule -d radius
$ restorecon -R -v /usr/sbin/radiusd /var/log/radius/

For setting SELinux in Permissive mode, please refer to the RootUsers guide to SELinux. It also applies to CentOS 6: https://www.rootusers.com/how-to-enable-or-disable-selinux-in-centos-rhel-7/

Networking configuration

For production deployments, it is recommended that the machine be assigned a static IP address.

For CentOS networking information please refer to the ServerLab guide for CentOS 6: https://www.serverlab.ca/tutorials/linux/administration-linux/configure-centos-6-network-settings/

Firewall configuration

The following ports are required to be accessible from the outside world, both in the local firewall and in any external firewalls:

  • 2083/tcp (for RadSec connections to other Moonshot entities)
  • 12309/tcp (for Trust Router client connections - if using the Trust Router to broker trust relationships between entities)

Here are sample firewall rules that establish incoming and outgoing rules to both the Test and Live (Jisc Assent) Moonshot trust router infrastructures. If you connect to another Trust Router, adjust these rules to suit:

IP Tables sample firewall rules (Jisc Assent)

-A INPUT -m state --state NEW,ESTABLISHED,RELATED -m tcp -p tcp -s 0/0 --dst <IdP/RP Proxy IP address> --dport 2083 -j ACCEPT
-A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -m tcp -p tcp -s <IdP/RP Proxy IP address> --dst 0/0 --dport 2083 -j ACCEPT
 -A INPUT -m state --state NEW,ESTABLISHED,RELATED -m tcp -p tcp -s 212.219.179.130,212.219.179.131,212.219.179.138,212.219.179.146 --dst <IdP/RP Proxy IP address> --dport 12309 -j ACCEPT
-A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -m tcp -p tcp -s <IdP/RP Proxy IP address> --dst 212.219.179.130,212.219.179.131,212.219.179.138,212.219.179.146 --dport 12309 -j ACCEPT

IP Tables sample firewall rules (Test Network)

-A INPUT -m state --state NEW,ESTABLISHED,RELATED -m tcp -p tcp -s 0/0 --dst <IdP/RP Proxy IP address> --dport 2083 -j ACCEPT
-A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -m tcp -p tcp -s <IdP/RP Proxy IP address> --dst 0/0 --dport 2083 -j ACCEPT
-A INPUT -m state --state NEW,ESTABLISHED,RELATED -m tcp -p tcp -s 13.79.134.211,13.79.128.103,52.169.31.104 --dst <IdP/RP Proxy IP address> --dport 12309 -j ACCEPT
-A OUTPUT -m state --state NEW,ESTABLISHED,RELATED -m tcp -p tcp -s <IdP/RP Proxy IP address> --dst 13.79.134.211,13.79.128.103,52.169.31.104 --dport 12309 -j ACCEPT

Add the Required Repositories

Moonshot requires two yum repositories to be added to the system - EPEL (home of some required dependencies), and the Moonshot repository itself.

  1. Install EPEL by running the following command:

    $ yum install epel-release

    Depending on your platform, the epel-release package is part of one of the optional repositories. On CentOS, it is part of the Extras repository. On RHEL, you must enable both the Optional and Extras repositories. For more information, visit the EPEL homepage.

  2. Install the Moonshot repository by creating a new file at /etc/yum.repos.d/moonshot.repo with the following content:

    [Moonshot]
name=Moonshot
baseurl=http://repository.project-moonshot.org/rpms/centos6/
failovermethod=priority
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/Moonshot

  3. Install the Moonshot GPG key:

    $ wget -O /etc/pki/rpm-gpg/Moonshot http://repository.project-moonshot.org/rpms/centos6/moonshot.key

    Verifying the Moonshot GPG key

    If you wish to verify the Moonshot GPG key's validity and integrity, please see the Packaging GPG Key for further details.

  4. Install the official Shibboleth repository. 

    $ wget -O /etc/yum.repos.d/shibboleth.repo http://download.opensuse.org/repositories/security:/shibboleth/CentOS_CentOS-6/security:shibboleth.repo
  • No labels